Customization: | Available |
---|---|
Application: | Communication, Art, Sensor, Medicine, Probe, Sensing |
Type: | Single-Mode & Multi-Mode |
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Parameter | Test Point | Min | Typical | Max | Unit | Notes |
Power Consumption | 3.5 | W | ||||
Supply Current | ICC | 1.06 | A | |||
Transceiver Power-on Initialization Time | 2000 | ms | 1 | |||
Transmitter (each Lane) | ||||||
Single-ended Input Voltage Tolerance (Note 2) | -0.3 | 4.0 | V | Referred to TP1 signal common | ||
AC Common Mode Input Voltage Tolerance | 15 | mV | RMS | |||
Differential Input Voltage Swing Threshold | 50 | mVpp | LOSA Threshold | |||
Differential Input Voltage Swing | Vin,pp | 190 | 700 | mVpp | ||
Differential Input Impedance | Zin | 90 | 100 | 110 | ohm | |
Differential Input Return Loss | See IEEE 802.3ba 86A.4.11 | dB | 10MHz- 11.1GHz | |||
J2 Jitter Tolerance | Jt2 | 0.17 | UI | |||
J9 Jitter Tolerance | Jt9 | 0.29 | UI | |||
Data Dependent Pulse Width Shrinkage (DDPWS ) Tolerance | 0.07 | UI | ||||
Eye Mask Coordinates {X1, X2, Y1, Y2} | 0.11, 0.31 95, 350 |
UI mV |
Hit Ratio = 5x10-5 | |||
Receiver (each Lane) | ||||||
Single-ended Output Voltage | -0.3 | 4.0 | V | Referred to signal common | ||
AC Common Mode Output Voltage | 7.5 | mV | RMS | |||
Differential Output Voltage Swing | Vout,pp | 300 | 850 | mVpp | ||
Differential Output Impedance | Zout | 90 | 100 | 110 | ohm | |
Termination Mismatch at 1MHz | 5 | % | ||||
Differential Output Return Loss | See IEEE 802.3ba 86A.4.2.1 | dB | 10MHz- 11.1GHz | |||
Common Mode Output Return Loss | See IEEE 802.3ba 86A.4.2.2 | dB | 10MHz- 11.1GHz | |||
Output Transition Time | 28 | Ps | 20% to 80% | |||
J2 Jitter Output | Jo2 | 0.42 | UI | |||
J9 Jitter Output | Jo9 | 0.65 | UI | |||
Eye Mask Coordinates {X1, X2, Y1, Y2} | 0.29, 0.5, 150, 425 | UI mV |
Hit Ratio = 5x10-5 |
Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
Wavelength Assignment | L0 | 1264.5 | 1271 | 1277.5 | nm | ||
L1 | 1284.5 | 1291 | 1297.5 | nm | |||
L2 | 1304.5 | 1311 | 1317.5 | nm | |||
L3 | 1324.5 | 1331 | 1337.5 | nm | |||
Transmitter | |||||||
Side Mode Suppression Ratio | SMSR | 30 | dB | ||||
Total Average Launch Power | PT | 10.5 | dBm | ||||
Average Launch Power, each Lane | PAVG | -2.7 | 4.5 | dBm | |||
Optical Modulation Amplitude (OMA), each Lane | POMA | -0.3 | 5 | dBm | 1 | ||
Difference in Launch Power between any Two Lanes (OMA) | Ptx,diff | 4.7 | dB | ||||
Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each Lane | -0.5 | dBm | |||||
TDP, each Lane | TDP | 2.6 | dB | ||||
Extinction Ratio | ER | 4.5 | dB | ||||
Relative Intensity Noise | RIN | -128 | dB/Hz | 12dB reflection | |||
OpticalReturnLossTolerance | TOL | 20 | dB | ||||
TransmitterReflectance | RT | -12 | dB | ||||
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} | {0.25, 0.4, 0.45, 0.25, 0.28, 0.4} | ||||||
Average Launch Power OFF Transmitter, each Lane | Poff | -30 | dBm | ||||
Receiver | |||||||
Damage Threshold, each Lane | THd | 3 | dBm | 2 | |||
Average Receive Power, each Lane | -19 | -4.5 | dBm | ||||
Receiver Reflectance | RR | -26 | dB | ||||
Receive Power (OMA), each Lane | -4 | dBm | |||||
Receiver Sensitivity (OMA), each Lane | SEN | -19 | dBm | 3 | |||
Difference in Receive Power between any Two Lanes (OMA) | Prx,diff | 7.5 | dB | ||||
LOS Assert | LOSA | -35 | dBm | ||||
LOS Deassert | LOSD | -23 | dBm | ||||
LOS Hysteresis | LOSH | 0.5 | dB | ||||
Receiver Electrical 3 dB upper Cutoff Frequency, each Lane | FC | 12.3 | GHz | ||||
Conditions of Stress Receiver Sensitivity Test (Note 5) | |||||||
Vertical Eye Closure Penalty, each Lane | 2.2 | dB | 4 | ||||
Stressed Eye J2 Jitter, each Lane | Per OTL3.4, G.8251 | UI | |||||
Stressed Eye J9 Jitter, each Lane | Per OTL3.4, G.8251 | UI |