PWM Controlled Power Supply Module/Concentrated Power Supply System/Voltage Unit

• Customization: Available
• Wiring Devices: ODF
• Certification: CE, ISO, RoHS, GS
• Model NO.: RAYTEK-LMX
• Condition: New
• Voltage Mode: AC
• Output Neutral to Chassis·: 150 VAC
• Voltage Response Time: 60μsec Rypical,10-90% Load Step
• Output Noise: -66dB
• DC Offset: Less Than 20mv
• Accuracy: ±0.1%(Csc Mode)
• Transport Package: Wooden
• Specification: 3/5/8U
• Trademark: RAYTEK
• Origin: China Shanghai
• HS Code: 8464901900
• Production Capacity: 1000piese/Year
• Package Size: 40.00cm * 30.00cm * 50.00cm
• Package Gross Weight: 70.000kg

Product Description

Product Description

The RAYTEK-LMX series of power supplies was newly launched in 2020, featuring high-performance and high-power linear AC power. The linear amplifier in the RAYTEK-LMX series power supply meets the requirements of high peak factor, low distortion, and high fidelity output waveform, making it suitable for demanding AC test power supply applications. The independent model range is from 500 VA to 6 kVA. It can be connected in parallel to expand the power from 8kVA to 30kVA. All models offer single-phase and three-phase modes.

Our Advantages

Characteristic

1.USB, LAN (LXI), IEEE-488.2, and RS-232C are compatible with SCPI
2.True linear technology provides excellent fidelity in communication output
3.Power levels range from 500VA to 6kVA standard; 30kVA optional
4.Three phase, phase separated, and single-phase output modes
5.Frequency range 15-5000Hz
6.Vthd distortion less than 0.1%
7.Ripple and noise are less than -72dB
8.Phase angle programming in 3-phase mode
9.Accurate output voltage and load regulation
10.Measure the voltage, root mean square current, peak current, apparent power, and true power at all phases
11.Harmonic measurement
12.Capture the range function of voltage and current waveforms
13.Selection of sine, square, triangle, clipped sine, and any waveform
14.Output transient programming
 15.Single phase/three-phase switch optional
16.External reference instrument calibration
17.CE safety, EMC, and NTRL safety markings

Certifications

RAYTEK LSX Series Specification and Model Table

Model	Power (VA)	Phase	Output (VRSS)	Input (ArSs)	Output phase	Height (U)	Weight (Lbs./KG)
Single mode phase
105LMX	500	1Ø	135/270	4/2	1Ø	3	70/31.8
108LMX	750	1Ø	135/270	6/3	1Ø	3	70/31.8
112LMX	1200	1Ø	150/300	10/5	1Ø	3	80/36.3
140LMX	4000	1Ø	135/270	32/16	3Ø	8	185/84.0
160LMX	6000	1Ø	135/270	48/16	3Ø	8	195/88.6
Three mode phase
305LMX	500	1Ø 3Ø	135/270 135 (Vl-N)	4/2 1.3 per Ø	1Ø	3	74/33.6
308LMX	750	1Ø 3Ø	135/270 135 (Vl-N)	6/2 2 per Ø	1Ø	3	74/33.6
312LMX	1200	1Ø 3Ø	150/300 150 (Vl-N)	10/3.3  3.3 per Ø	1Ø	3	80/36.3
320LMX	2000	1Ø 3Ø	135/270 135 (Vl-N)	18/6  6 per Ø	3Ø	5	150/68.2
345LMX	4500	1Ø 3Ø	135/270 135 (Vl-N)	36/12 12 per Ø	3Ø	8	190/86.3
360LMX	6000	1Ø 3Ø	135/270 135 (Vl-N)	48/16 16 per Ø	3Ø	8	195/88.6

Optional transformer coupling output voltage range model

Model

Power (VA)

Phase

Output voltage (VRMS)

Output current (Arms)

Input phase

Height (U)

Weight (Lbs./KG)

Single mode

Transformer

Transformer

Direct

1.5:1

2.0:1

2.5:1

Direct

1.5:1

2.0:1

2.5:1

105LMXT

500

1Ø/2Ø

135/270

202/404

270/540

338/600

4/2

2.6/1.3

2/1

1.6/0.8

1Ø

3

97/44.0

108LMXT

750

1Ø/2Ø

135/270

202/404

270/540

338/600

6/3

4/2

3/1.5

2.4/1.2

1Ø

3

97/44.0

140LMXT

4000

1Ø/2Ø

135/270

202/404

270/540

338/600

32/16

21.3/10.7

16/8

12.8/6.4

3Ø

11

310/140.8

160LMXT

6000

1Ø/2Ø

135/270

202/404

270/540

338/600

48/16

32/10.7

24/8

19.2/6.4

3Ø

11

320/145.4

Three

Transformer

Transformer

Direct

1.5:1

2.0:1

2.5:1

Direct

1.5:1

2.0:1

2.5:1

305LMXT

500

1Ø/2Ø 3Ø

135/270 135/234

202/404 202/350

270/540 270/468

338/600 338/585

4 1.3/Ø

2.6/1.3 1.0/Ø

2/1 .75/Ø

1.6/0.8 0.6/Ø

1Ø

3

100/45.5

308LMXT

750

1Ø/2Ø 3Ø

135/270 135/234

202/404 202/350

270/540 270/468

338/600 338/585

6/2 2/Ø

4/1.3 1.3/Ø

3/1 1/Ø

2.4/0.8 0.8/Ø

1Ø

3

100/45.5

320LMXT

2000

1Ø/2Ø 3Ø

135/270 135/234

202/404 202/350

270/540 270/468

338/600 338/585

18/6 6/Ø

12/4 4/Ø

9/3 3/Ø

7.2/2.4 2.4/Ø

3Ø

8

275/125

345LMXT

4500

1Ø/2Ø 3Ø

135/270 135/234

202/404 202/350

270/540 270/468

338/600 338/585

36/12 12/Ø

24/8 8/Ø

18/6 6/Ø

14.4/4.8 4.8/Ø

3Ø

11

315/143.1

360LMXT

6000

1Ø/2Ø   3Ø

135/270 135/234

202/404 202/350

270/540 270/468

338/600 338/585

48/16 16/Ø

32/10.7 10.7/Ø

24/8 8/Ø

19.2/6.4 6.4/Ø

3Ø

11

320/145.4

Product Parameters

Main parameters of linear power supply

Output frequency	15 to 5000Hz full power
Voltage stabilization rate of input power supply	Maximum 0.1% within ± 10% input range
load regulation	0.25% (20 to 2000Hz);0.50% (2000 to 5000Hz);The voltage continuous self calibration function (CSC) can be used to increase it to 0.03%.
Output distortion rate	0.1%THD(15 to 1,000Hz), 0.25%THD(1,000 to 5,000Hz).
Ripple And Noise	-72 dB
Response time	5 subtle, typical step load changes
Output wide band	The general small signal output bandwidth is 5Hz to 50KHz
Institutional specifications	All models are designed with a 19 inch rack mount. Products with a capacity of 1800VA or above are equipped with handles for easy handling
Install	Standard 19 inch rack mounted. All models are available for purchasing slide rails.
Height	Please refer to the model table for panel height
Depth	The machine body, including wiring terminals, handles, and wiring, should not exceed 24 inches from the front to the back of the machine tool.
Heat dissipation	The forced air cooling method of blowing air from the front or side and blowing air from the back can dissipate heat. The use of temperature controlled and speed regulated fans can reduce noise and extend fan life.

Controller specifications

Out frequency	15.00 to 5000Hz±0.01%
Output voltage (direct coupling)	Programmable control, 0-VSAX, with 0.1V voltage step changes (see table)
Phase angle	Phase B and C are based on phase A, programmable, 0-359 °, with a resolution of ± 1 ° and an accuracy of ± 0.5 °
Current Limit	The current limit can range from zero to the maximum peak current Ipeak of the model, with an accuracy of ± 0.5% and a resolution of ± 10SA.
Waveform library	It stores 200 waveform libraries that can be edited and executed in any way and at any output phase.
Voltmeter	Range: 0-340VL-N, 0-600VL-L Resolution: 0.10VAC (front panel), 0.001VAC (remote) Accuracy: ± 0.1%
Ammeter	Range: 100% rated current Resolution: 0.01AAccuracy: ± (0.5%+f (kHZ) * 0.5%) F S.
Power meter	Scope: Based on the electrical rangeResolution: 1W or 1VA (front panel), 0.1W or 0.1VA (remote)Accuracy: ± 0.75%, full scale
Power factor and peak factor	Calculate and display to four significant digits

After Sales Service

Our Customer Support Program provides the training, repair, calibration, and technical support services that our customers value. In addition to receiving the right test equipment, our customers can also count on excellent support before, during and after the sale. With company owned support and service centers around the world, support is never far away. Complete calibration and repair services are offered at our US, European and Chinese manufacturing facili-ties (pls connect customer service ).  Calibrations are to original factory specifications and are traceable to NIST (National Institute of Standards and Technology).

Main Export Countries & Areas:
USA, UK, Japan, Germany, Spain, France, Swiss, Korea, Russia, Mexico, Brazil, Argentina, Pakistan, India, Portugal, Canada, New Zealand, South Africa, UAE, Egypt, Norway, Netherland, Russia, Australia, Saudi Arab, Turkey, Finland, Poland ,etc.
Payment Method: by T/T or Western Union or L/C
Delivery time: 7-10 days.
Quality Warranty: Shanghai Z-printing offers quality warranty for our lasers products with "3R" policy. For any inferior-quality products, Z-printing company is responsible for return, replacement and refund.
For specific installation and operation, please refer to the product manual or contact customer service for operation tips or videos after receiving the product. The equipment is guaranteed for one year, and artificial or abnormal damage is not covered by the warranty. If it exceeds one year, a certain fee will be charged for the relevant after-sales service. This device will continue to be optimized and improved due to various factors. At that time, please pardon us not notify separately. Thank you for your support and understanding.

Detailed Photos